Had the shifter out a few times now and I feel like the gearing is off. Not sure what I have on there now but I will have to clean it up to find out.
What's a good setup for a Moto ?
Gearing
Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
- Bainesy36
- Posts: 123
- Joined: Thu May 26, 2011 3:11 pm
- First Name: Nigel
- Last Name: Baines
- City/Town: Calgary
Re: Gearing
I believe the ICC/KZ gearing is 17/27, so based on Joey's recommendations for stock moto and ICC/KZ at Warburg, I'd imagine something like 18/28 could work.
-
- Posts: 390
- Joined: Wed Oct 22, 2008 10:33 am
- First Name: Joey
- Last Name: Guyon
- City/Town: Calgary
Re: Gearing
Last year I was 1.625 in ccw and 1.611 cw.
It's a good starting point. I had programmable ignition and '01 cylinder so you may have to go a half ratio taller (1.588?) If you run a '99 cyl.
It's a good starting point. I had programmable ignition and '01 cylinder so you may have to go a half ratio taller (1.588?) If you run a '99 cyl.
-
- Posts: 650
- Joined: Wed Jul 09, 2008 1:57 pm
- First Name: Mark
- Last Name: Hillier
- City/Town: Calgary
Re: Gearing
Hmm...I'm 16/26 now (1.625) so maybe I just need more laps to get a better feel for this puppy.....
Thanks !
Thanks !
Mark Hillier #44 VLR Senior, Shifter