Briggs Motor Mount
Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
-
- Posts: 138
- Joined: Fri Oct 03, 2008 4:00 pm
- First Name: Tony
- Last Name: Illing
- City/Town: calgary
Briggs Motor Mount
However at US $170 for the complete kit it is pricey. Probably less if you already have the Burris base plate. It is available from http://www.innovativekarting.com
- John Kwong
- Posts: 1313
- Joined: Wed Sep 24, 2008 8:00 am
- First Name: John
- Last Name: Kwong
- City/Town: Calgary
- Location: Calgary
- Contact:
Re: Briggs Motor Mount
Here is a link to the motor mount I use and what we purchased for the Try-A-Kart fleet $40.95 US : http://www.bmikarts.com/Motor-Mounts_c_243.html
It has the solid base plate. All the hardware comes with the mount and it is in imperial sizing which is bit of a pain but the motor mount clamps can be tightened with a 6mm hex with no problem. These ones are not anodized but the machining is well done and the aluminum is good quality.
They also sell the fancier more expensive mounts that are still under $90.
John K
It has the solid base plate. All the hardware comes with the mount and it is in imperial sizing which is bit of a pain but the motor mount clamps can be tightened with a 6mm hex with no problem. These ones are not anodized but the machining is well done and the aluminum is good quality.
They also sell the fancier more expensive mounts that are still under $90.
John K
-
- Posts: 258
- Joined: Wed Apr 04, 2012 10:16 am
- First Name: Sam
- Last Name: Kozma
- City/Town: Airdrie
Re: Briggs Motor Mount
I have a 1 or 2 of these mounts I can sell.