Briggs Motor Mount

Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
Post Reply
Tony
Posts: 138
Joined: Fri Oct 03, 2008 4:00 pm
First Name: Tony
Last Name: Illing
City/Town: calgary

Briggs Motor Mount

Post by Tony »

20141230_171434.jpg
20141230_171434.jpg (1.59 MiB) Viewed 4960 times
Briggs have a couple of recommendations for motor mounts in their site that reduce engine stresses and vibrations(this one is not included),. Bbut with the solid base plate from Burris it should be reasonably strong and it offers the advantage of chain adjustments from above.
However at US $170 for the complete kit it is pricey. Probably less if you already have the Burris base plate. It is available from http://www.innovativekarting.com

User avatar
John Kwong
Posts: 1312
Joined: Wed Sep 24, 2008 8:00 am
First Name: John
Last Name: Kwong
City/Town: Calgary
Location: Calgary
Contact:

Re: Briggs Motor Mount

Post by John Kwong »

Here is a link to the motor mount I use and what we purchased for the Try-A-Kart fleet $40.95 US : http://www.bmikarts.com/Motor-Mounts_c_243.html
It has the solid base plate. All the hardware comes with the mount and it is in imperial sizing which is bit of a pain but the motor mount clamps can be tightened with a 6mm hex with no problem. These ones are not anodized but the machining is well done and the aluminum is good quality.

They also sell the fancier more expensive mounts that are still under $90.

John K
John Kwong___CIR Realty___403-714-5583
www.johnkwong.ca
http://kartopractor.weebly.com/

samk
Posts: 258
Joined: Wed Apr 04, 2012 10:16 am
First Name: Sam
Last Name: Kozma
City/Town: Airdrie

Re: Briggs Motor Mount

Post by samk »

I have a 1 or 2 of these mounts I can sell.

Post Reply