Hello,
New this year,
Just a few questions about parts that everyone uses or what can be used for the LO206 class.
Fuel filters, air filters.
And there is a line that goes up from the fuel tank towards the steering wheel, I see other people with a plastic container, my line is open, what is this container used for?
Thanks
LO206 class parts
Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
- Jackmazury
- Posts: 227
- Joined: Tue May 09, 2017 9:00 pm
- First Name: Jack
- Last Name: Mazury
- City/Town: Calgary
Re: LO206 class parts
Most people use a rotax fuel filter it seems, the air filter is a spec item that comes from briggs and Stratton. That other line is just a vent for your tank, ideally it would be hooked up to a catch can to catch any splash coming out of the tank.
Shifter #30
Class Representative
Class Representative
-
- Posts: 20
- Joined: Fri May 03, 2019 10:07 pm
- First Name: Michael
- Last Name: Haddon
- City/Town: Calgary
Re: LO206 class parts
Thanks jack
Will get a couple filters, catch can for the fuel tank breather, does it need holes in the top like the lower catch can
Will get a couple filters, catch can for the fuel tank breather, does it need holes in the top like the lower catch can
- John Kwong
- Posts: 1317
- Joined: Wed Sep 24, 2008 8:00 am
- First Name: John
- Last Name: Kwong
- City/Town: Calgary
- Location: Calgary
- Contact:
Re: LO206 class parts
Yes, the catch can needs a small vent hole.
John K
John K
-
- Posts: 20
- Joined: Fri May 03, 2019 10:07 pm
- First Name: Michael
- Last Name: Haddon
- City/Town: Calgary
Re: LO206 class parts
Thanks John,
I figured as much, I know positive pressure effects the lower, but would make sense the the upper should breathe as well.
I figured as much, I know positive pressure effects the lower, but would make sense the the upper should breathe as well.