Search found 98 matches
- Tue May 04, 2021 1:58 pm
- Forum: Pit Talk
- Topic: 3D Printed Useful Things and Parts
- Replies: 5
- Views: 3359
3D Printed Useful Things and Parts
Hello CKRC. I've recently finished designing, printing, and testing a dial indicator extension to use on my VLR engine for setting timing, so thought it was time to share. If you are interested in 3D Printing, I have a collection going on Thingiverse with various items for karting I have found. If y...
Re: Vlr
Nope sorry Fred, I've got the fastest.
Re: Vlr
Fantastic. I'm out in the afternoon if you need any more help, but I'm pretty much a rookie.
I'm number 42. Jankie white electrical tape numbers for tomorrow. haha
I'm number 42. Jankie white electrical tape numbers for tomorrow. haha
Re: Vlr
The red button has to be out to get spark. Make sure the little wire coming out of the coil is connected to ground. If you follow how the manual says to wire up the coil, you will not have ground. And or course, make sure the wire coming out of the magnito is connected to the coil. Pull the plug out...
- Fri Apr 30, 2021 6:19 pm
- Forum: Pit Talk
- Topic: Rookie School / Fred's Concussion
- Replies: 1
- Views: 1479
Rookie School / Fred's Concussion
I would assume that with Fred being offline for 24hrs+ due to his concussion, that the rookie school scheduled for tomorrow morning would be postponed. Can anyone confirm this please?
- Thu Apr 15, 2021 2:41 pm
- Forum: ROK VLR 100
- Topic: 2021 Drivers List
- Replies: 27
- Views: 15817
Re: 2021 Drivers List
Excellent, I'm excited to see if we can get 20 drivers in one day.
- Sat Apr 10, 2021 6:58 pm
- Forum: ROK VLR 100
- Topic: Setting the timing.
- Replies: 4
- Views: 3040
Re: Setting the timing.
Thanks Fred.
- Thu Apr 08, 2021 1:59 pm
- Forum: ROK VLR 100
- Topic: Setting the timing.
- Replies: 4
- Views: 3040
Re: Setting the timing.
Yes, I have the old one where there are 4 slots (there is a division between the screws), and the new one (mounted to the engine) that is just two large slots, two screws per slot.
Perhaps is the answer removing two of the screws, leaving only 1 per slot? Just thought of this now.
Perhaps is the answer removing two of the screws, leaving only 1 per slot? Just thought of this now.
- Wed Apr 07, 2021 7:18 pm
- Forum: ROK VLR 100
- Topic: Setting the timing.
- Replies: 4
- Views: 3040
Setting the timing.
Well, the manual says the recommended timing is 3mm. From what info I can find, you set this by using a dial indicator, zeroing it at TDC, then turning the engine back until the dial indicator drops 3mm, and that is where the timing mark should be set to. However, even with the new style timing plat...
- Tue Apr 06, 2021 6:58 pm
- Forum: ROK VLR 100
- Topic: 2021 Drivers List
- Replies: 27
- Views: 15817
Re: 2021 Drivers List
Kevin, will you be joining us in the VLR class? Here is some info on Senior vs Masters. Senior Rok WCVLR Age 14 - UP Weight 340 lbs Masters Rok WCVLR Age 32 – UP Weight 375 lbs This is minimum weight, including driver (with all gear), and complete kart with remaining fuel weighed after the race. Num...