Page 1 of 1

LO206 class parts

Posted: Mon May 06, 2019 12:01 pm
by MHaddon
Hello,

New this year,

Just a few questions about parts that everyone uses or what can be used for the LO206 class.

Fuel filters, air filters.

And there is a line that goes up from the fuel tank towards the steering wheel, I see other people with a plastic container, my line is open, what is this container used for?

Thanks

Re: LO206 class parts

Posted: Mon May 06, 2019 3:15 pm
by Jackmazury
Most people use a rotax fuel filter it seems, the air filter is a spec item that comes from briggs and Stratton. That other line is just a vent for your tank, ideally it would be hooked up to a catch can to catch any splash coming out of the tank.

Re: LO206 class parts

Posted: Mon May 06, 2019 4:41 pm
by MHaddon
Thanks jack

Will get a couple filters, catch can for the fuel tank breather, does it need holes in the top like the lower catch can

Re: LO206 class parts

Posted: Mon May 06, 2019 7:13 pm
by John Kwong
Yes, the catch can needs a small vent hole.

John K

Re: LO206 class parts

Posted: Mon May 06, 2019 10:35 pm
by MHaddon
Thanks John,

I figured as much, I know positive pressure effects the lower, but would make sense the the upper should breathe as well.