Vlr
Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
-
Brian Turner
- Posts: 11
- Joined: Fri Apr 30, 2021 9:48 pm
- First Name: Brian
- Last Name: Turner
- City/Town: crossfield
Vlr
Enyone out there have a salution to y I can't get the engine to run lots of fule fully charged battery and button pushed in jimmy and Fred rebuilt engine
-
evannadeau
- Posts: 100
- Joined: Thu Mar 19, 2020 10:21 pm
- First Name: Evan
- Last Name: Nadeau
- City/Town: Calgary
Re: Vlr
The red button has to be out to get spark.
Make sure the little wire coming out of the coil is connected to ground. If you follow how the manual says to wire up the coil, you will not have ground.
And or course, make sure the wire coming out of the magnito is connected to the coil.
Pull the plug out, and put it into the plug wire, then hold against the head and run the starter, checking if you have spark. CAUTION: try to only touch the rubber plug boot while holding it to the head to avoid being a shock.
If any of the wiring does not make sense, attach some pictures, and I'll try to help diagnose.
Make sure the little wire coming out of the coil is connected to ground. If you follow how the manual says to wire up the coil, you will not have ground.
And or course, make sure the wire coming out of the magnito is connected to the coil.
Pull the plug out, and put it into the plug wire, then hold against the head and run the starter, checking if you have spark. CAUTION: try to only touch the rubber plug boot while holding it to the head to avoid being a shock.
If any of the wiring does not make sense, attach some pictures, and I'll try to help diagnose.
VLR #42
-
Brian Turner
- Posts: 11
- Joined: Fri Apr 30, 2021 9:48 pm
- First Name: Brian
- Last Name: Turner
- City/Town: crossfield
Re: Vlr
Thanks that helped found a loose wire now it's running almost ready for tomorrow test
-
evannadeau
- Posts: 100
- Joined: Thu Mar 19, 2020 10:21 pm
- First Name: Evan
- Last Name: Nadeau
- City/Town: Calgary
Re: Vlr
Fantastic. I'm out in the afternoon if you need any more help, but I'm pretty much a rookie. 
I'm number 42. Jankie white electrical tape numbers for tomorrow. haha
I'm number 42. Jankie white electrical tape numbers for tomorrow. haha
VLR #42
-
evannadeau
- Posts: 100
- Joined: Thu Mar 19, 2020 10:21 pm
- First Name: Evan
- Last Name: Nadeau
- City/Town: Calgary