Rotax FR125 EVO Senior - poor compression?
Posted: Sat Apr 21, 2018 3:01 pm
Based on an EVO.
Running flat out, suddenly engine felt like it had an engine brake, turned it off real fast.
Still cranks, albeit sounds a little off.
Checked the following:
~ Top of piston appears good
~ Plug clean (no metal shavings lol)
~ Thumb on plug hole, crank and can feel pressure (not sure how much there should be)
~ Pulled carb off
~ Pulled reed out and it appears fine
~ Cranked while reed out and piston wall looks great, no visible wear and/or scuffs etc.
Any suggestions for next steps of trouble shooting, cranks, sounds slightly off (maybe a lack of full compression) and will not fire.
Thanks,
Ian.
Running flat out, suddenly engine felt like it had an engine brake, turned it off real fast.
Still cranks, albeit sounds a little off.
Checked the following:
~ Top of piston appears good
~ Plug clean (no metal shavings lol)
~ Thumb on plug hole, crank and can feel pressure (not sure how much there should be)
~ Pulled carb off
~ Pulled reed out and it appears fine
~ Cranked while reed out and piston wall looks great, no visible wear and/or scuffs etc.
Any suggestions for next steps of trouble shooting, cranks, sounds slightly off (maybe a lack of full compression) and will not fire.
Thanks,
Ian.