OTK SHIFTER FOR SALE---SOLD-SOLD-SOLD

Buy & Sell Karting-Related Goods
Forum rules
Karting-related goods & services ONLY.
After 90 days, ads may be removed (you are welcome to repost if not sold).
If item(s) are not located in Calgary, location must be indicated in the Subject field.
You must put a phone number or email address in your ad for interested parties to contact you.
Post Reply
RAVEN
Posts: 12
Joined: Fri Sep 30, 2016 10:50 am
First Name: Robin
Last Name: White
City/Town: Banff

OTK SHIFTER FOR SALE---SOLD-SOLD-SOLD

Post by RAVEN »

Hanging up the Gloves...sort of....

Selling My Shifter,......$8,750.00... This is a Solid Great Deal...with everything included....

-- This is as close to a new Shifter as possible, with all the heavy lifting done for you..
--OTK EXP RACER Chassis,-- with low hours, Approx, 20hrs., never wrecked, and straight just needs to be driven again!
--Kart was completely refurbished, the winter of 2019 for the 2020 season and has sat in my warm garage since.
--Stripped down and redone ..Red .. by TOP GUN in Calgary
--4 sets OTK wheels-- , 2 sets --MXC , 1 set-- MXJ, --1set-- Alum. for wets all with decent T&T rubber, in tire bags
--2-- Sets body work, new AERO style , mounted, and one original OTK , all mounts in perfect condition
--new graphics , all perfect condition
--FIK drop down bumper conversion on the new body work
--MYCHRON-5 ,.. Transponder, [ pre-subscription ] ..magnetic lap counter,..data key,..all applicable chargers
--Lots of tidy custom touch's to make life easier when race weekend thrashing happens.
--Recent Brake [ August ] bleed done by Jesse at Overdrive
--did I mention I polished a few things....as tidy as they come.....

--ENGINE--
--TM10-C with just under 5hrs on the whole engine, fresh top end done by Joey at OVERDRIVE
-- at that time, original install done by Jesse
-- this schedule should give you 3 more top end rebuilds [ 9-10 hrs.each ] before complete engine rebuild.
--Depending on how many T&T's you do, this equates to 2 solid season or, maybe 3..just saying
-- New Reeds.. New Plug,..New Air-filter,..New fuel lines and filter
--Engine pre-heater ,..New water-pump, New Axle, new axle bearings, gearing 17-27
--Custom rad air deflector, & chain guard..polished ..of course..
--New rear axle bearings, front we're new last season out [2019]
--All new silicone hoses,..and clamps
--Kart stand and -- Overdrive kart cover--to hide all the trick tuning you're going to do.....
--Engine has just had top end run in [ end of August ] and is set to go, [ 3 , 6 min. sessions ]
--As fresh as you can get it without all the hassles.
-- Kart is set-up for 5'11" ,185 lb [suited driver] with 1/4 tank of Fuel, came in 2lbs under class weight

--EVERYTHING BELOW IS GREAT ADDED VALUE WHEN YOU CONSIDER NEW COST AND TIME INVESTED
--TO BRING TOGETHER--

--SPARE PARTS--
--2..40mm axles ---1-N,..1-H,used, and 1-H, new and installed
--5 Tie Rods, 2--Tie Rods with ends, set up for a quick change for wet set up..and 3 Spares
--1--Steering Shaft
--7-- Seat Stays
--2-- Air-Cleaners, used but clean and ready to go
--2--Counter-shaft Sprockets ..New... 16 and 18
--6 rear axle sprockets... 23..24..25..26..27 [alum.]..28 all perfect condition, lots of gearing options here
-- lots of spare chain and master-links
--1--JET BLOCK , Main Jets.. 122..125..[2]..129..130..140..145..148..150..152..155..[2]..158
--3-- INTERNAL Jets.. 1 266 Emulsion Tube..60 Pilot..B-48 Internal Pilot
--2 New Inner Throttle cables
--2--spare TM Engine Frame clamps..[not polished...sorry ]
--1-- Rib-Tech seat.. good condition, not a Swiss Cheese seat....
--1- Box assorted lubricants, All Motul..1- partial, Motul 800 ,1-new Motul Brake Fluid ,
-- partial's of Motul, chain lube and cleaners
--1-Box , Assorted coolant hoses, seat padding etc..
--2-- Lockable, Multi-Compartment case's for other spare parts, lots of goodies here like
--brake pads, tie rod ends , water pump, seat spacers axle keys, to much to list.

--TOOLS--
--1--Chain Breaker
--1--Axle removal tool...[Kart Master]
--1-- Piston Stop [composite material] , threads into spark-plug hole and helps in removing counter-shaft sprocket.
--1-- Bead Breaker , Works great, breaks outer and inner beads at the same time
--1-- Righetti Tire removal and install tool
--1-- Wheel Balance Jig...[Pro-Racing]
--1--SNIPER Front Alignment Laser
--1-- VP Kart Fuel jug..20 liters

--YOU WILL NEED ALL THIS JUST TO KEEP JACK--JAKE--JOEY--AND JOHN...[ sorry Nathan ,You ARE FAST just not starting with a "J" ] ..are you are

--noticing a theme here, with all the J's ? , no wonder I had a hard time keeping you in sight, I was too far down the alphabet....


Happy to talk on the phone or e/mail you the list. Everything goes....ask for Rob.... 1 403 762 8098, home land line ... we will call forward when away from home base....

e/mail....... [email protected]
Last edited by RAVEN on Thu Nov 03, 2022 1:27 pm, edited 8 times in total.

User avatar
Jackmazury
Posts: 215
Joined: Tue May 09, 2017 9:00 pm
First Name: Jack
Last Name: Mazury
City/Town: Calgary

Re: OTK SHIFTER FOR SALE

Post by Jackmazury »

Sad to see you go Rob! Amazing kart for whoever buys it.
Shifter #30

Class Representative

Post Reply