2021 Vemmekart Chassis - 1400$

Buy & Sell Karting-Related Goods
Forum rules
Karting-related goods & services ONLY.
After 90 days, ads may be removed (you are welcome to repost if not sold).
If item(s) are not located in Calgary, location must be indicated in the Subject field.
You must put a phone number or email address in your ad for interested parties to contact you.
Post Reply
Cyruspischke
Posts: 34
Joined: Sat Aug 15, 2020 9:50 am
First Name: Cyrus
Last Name: Pischke
City/Town: Pincher Creek

2021 Vemmekart Chassis - 1400$

Post by Cyruspischke »

Selling my 2021 Vemme chassis. I used this chassis for 3 seasons of racing both here in Western Canada and down in the states with 100cc and 125cc engines and it's always served me well. At present it still holds the CCW VLR Senior track record.

Chassis has been bent once, but was straightened and hasn't had any creep in the 2 subsequent seasons I raced it. Also repaired a seat strut that has also held for 2 seasons. Also included is a spares package:
- 4 Steering columns
- Tie rod
- Front wheel
- H+S axles
- Brake seal kits
- Seat struts + mounting hardwear
- New rear bumper hardware

Kart will include an unmounted seat, but I'd recommend buying a new one as it's seen better days and has gotten pretty soft.

1400 takes the lot.

Best to text at 78zero-898-sixnine35
Attachments
PXL_20260129_164036713.MP.jpg
PXL_20260129_164036713.MP.jpg (500.63 KiB) Viewed 3552 times
PXL_20260129_164013561.MP.jpg
PXL_20260129_164013561.MP.jpg (315.87 KiB) Viewed 3552 times
PXL_20260129_164005599.MP.jpg
PXL_20260129_164005599.MP.jpg (556.71 KiB) Viewed 3552 times
PXL_20260129_163944575.MP.jpg
PXL_20260129_163944575.MP.jpg (496.97 KiB) Viewed 3552 times
PXL_20260129_163853875.MP.jpg
PXL_20260129_163853875.MP.jpg (494.4 KiB) Viewed 3552 times
PXL_20260129_163918294.MP.jpg
PXL_20260129_163918294.MP.jpg (485.67 KiB) Viewed 3552 times
Cyruspischke
Posts: 34
Joined: Sat Aug 15, 2020 9:50 am
First Name: Cyrus
Last Name: Pischke
City/Town: Pincher Creek

Re: 2021 Vemmekart Chassis - 1400$

Post by Cyruspischke »

Also worth noting that before storing this chassis 2 years ago I did a full teardown and rebuild, including going through fasteners and cleaning/lubricating bearings, etc. Its about as close to new as is possible to get at its age!
Post Reply